Filter
Top Products
1-15
Thru-hull mount water temperature sensor
T-02MSB, T-03MSB
• Select a mid-boat flat position. The sensor does not have to be
installed perfectly perpendicular. The sensor must not be damaged
in dry-docking operation.
• Select a place apart from equipment generating heat.
• Select a place in the forward direction viewing from the drain hole,
to allow for circulation of cooling water.
• Select a place free from vibration.
Install the sensor as shown in Figure 1-21.
Figure 1-21 Thru-hull mount water temperature sensors
T-02MSB, T-03MSB