Filter
Top Products
3-8
3.7 External Equipment Setup (Option)
This section shows you how to set up the GP-1650F/1650DF when
external equipment is connected. If a water temperature/speed sensor
is installed, you should complete this section with the boat in the
water and running, to confirm speed/water temperature readout.
Speed Source
1. Press the [MENU] key.
2. Press the software key labeled "DISPLAY OPTIONS".
3. Press the software key labeled "NEXT PAGE" to display the fol-
lowing display.
RETURN
EDIT
DISPLAY
SETUP2
s SPEED SOURCE GPS
TEMP SOURCE OWN XDCR
TEMP GRAPH OFF
ZOOM MARKER OFF
SPEED ADJ. +00%
TEMP ADJ. +00.0°F
DEPTH ADJ. +0.0ft
SPD
12.3kt
TEMP
62.5°F
DEPTH
2000.0ft
DGPS 3D
Figure 3-10 Display Setup 2 Display
4. Select "SPEED SOURCE" by the arrow key.
5. Press the software key "EDIT" to display the following message.
SPEED SOURCE
▲
OWN PDDWHL
GPS
▼
Figure 3-11 Speed Source Display
6. Select source of speed by the arrow key; "OWN PDDWHL"
(speed sensor) or "GPS". The selected item is indicated by black
button.
Adjust speed when you select "OWN PDDWHL". Refer to next
page.
7. Press the software key labeled "ENTER".
8. Press the [PLOT] key to finish.