Filter
Top Products
Figure 18
Figure 19
Step Fourteen:
Connect to Electrohydraulic unit at number
2. Be sure to seat this connection rmly.
(Other connections per autopilot
installation manual.)
Step Fifteen:
Turn the system on by pressing and
releasing the Deckmount button (On/Off
switch). The Deckmount will continue
to ash for 30 seconds, but the throttle
functions will work while it is ashing.
With the manual throttle at idle, press
and hold the up arrow on the handheld
as shown in Figure 19, until the actuator
rod (threaded rod) is fully retracted. It
should move freely without any binding.
10