Filter
Top Products
Figure 9
6
Figure 7
Modied Part
Figure 8
Step Six: Modify drive arm
Use a hack saw or similar to
remove the left "ear" of the throttle
drive arm. See Figure 7. (You can
smooth the edges with a le or a
piece of sand paper if needed.
NOTE: The throttle lever must be
free to advance with out touching
the lug of the Manual throttle
advance. See Figure 8
LUG
Step Seven: Reinstall Throttle Drive Arm.
Reinstall the throttle drive arm. Be sure the
remaining ear is to the right of the LUG &
tighten hex head screw.
Original Part