Filter
Top Products
Step Sixteen:
Now test the Idle/Resume function by pressing
and releasing the Idle/Res on the handheld.
See gure 20. Be sure the Carburetor returns
to the full Idle Position. Press the Idle/Res
button again, the throttle should advance until
the actuator is fully retracted.
Step Seventeen:
Press the down arrow till the actuator rod is
out about 1/4 inch. Press the Idle/Resume to
conrm function. Re-adjust string (or parts)
if necessary. Return throttle to Idle position
by pressing the Idle/Res button.
Step Eighteen:
Use the factory standard throttle
(tiller or remote throttle) to
manually advance and reduce the
throttle setting. See gure 22.
Note: Which ever mechanism
is set for the highest throttle
setting will have control of the
carburetor (tiller, remote throttle,
or TR-1 throttle control.) If your
motor does not idle down fully
when using the autopilot throttle,
check your manual throttle to be
sure it is set at full Idle.
Figure 23
11
Figure 20
Figure 21
Figure 22
Slack in throttle string at
full idle.