Filter
Top Products
Install a 1/8″ NPT plugged tapping to the dryer
gas line shut-off valve for checking gas inlet
pressure.
Install a flare union adapter to the plugged
tapping.
NOTE: Apply pipe compound or Teflon
®
tape to
the threads of the adapter and plugged tapping.
19
Installation Instructions
Attach the flexible metal gas line connector
to the adapter.
B
Tighten the flexible gas line connection using
two adjustable wrenches.
C
D
Tighten all connections using two adjustable
wrenches. Do not overtighten.
E
CONNECTING THE DRYER TO THE
GAS SUPPLY (cont.)
Apply pipe compound or
Teflon
®
tape to all male
threads.
Open the gas shutoff valve.
F
Shut-off Valve
Plugged
Tapping
CONNECTING THE DRYER TO THE
GAS SUPPLY
Install a female 3/8″ NPT elbow at the end of
the dryer gas inlet.
Install a 3/8″ flare union adapter to the female
elbow.
IMPORTANT: Use a pipe wrench to securely hold
on to the end of the dryer gas inlet to prevent
twisting the inlet.
NOTE: Apply pipe compound or Teflon
®
tape to
the threads of the adapter and dryer gas inlet.
Elbow
A
Adapter
Apply Pipe Compound
Dryer Gas Inlet