Filter
Top Products
D Self check function “SC”
The self check function checks transceiver conditions by it-
self, and informs you in case a problem is found. The follow-
ing items are checked after the power is turned ON, then it
switches to operation mode.
• Temperature (Outside of –15°C to +55°C)
• Connected battery voltage
• Water intrusion
When error messages as shown below are displayed, see
trouble shooting for advice (p. 23).
15
6
SET MODE
D LCD contrast selection
“LC”
The contrast of the LCD can be adjusted from 4 levels.
• 1 (low contrast) – 4 (high contrast); 3 (default)
D Auto power save function “PS”
The power save function reduces current drain by deactivat-
ing the receiver circuit for preset intervals.
LCD contrast (default)
Self check OFF (default)
Error messages
Temperature error Battery voltage error Water intrusion error
Auto power save ON (default)