Filter
Top Products
Cleanup
18 313888E
Cleanup
1. Turn on/off switch OFF.
2. Perform Pressure Relief procedure, page 10.
3. Place pump in pail of clean water.
4. Shut OFF air if spraying with air. Remove applicator
from material and air hoses.
5. Base Coat Pump: Disconnect material hose from
pump outlet.
6. Insert wet cleaning ball into hose (Base Coat Only).
Connect material hose to pump outlet.
7. Hold material hose over waste pail.
8. Turn on/off switch ON and prime switch ON, or
applicator switch on material hose.
ti10796b
ti13644a
ti14284a
ti21040a
ti13639a
ti13643a
ti13638a
ti13640a
ti10795b