Graco SDM15 Marine Instruments User Manual


 
Dispensing Fluid and Operation Mode Screens
20 312865R
Dispensing Fluid and Operation Mode Screens
If you are in the Setup Mode, to display the Operation Mode Screens use the UP or DOWN ARROW button to select
HOME from the list. Press the Center ENTER button to display the Operation Mode Home Screen shown in F
IG. 18.
A complete description of the Setup Mode Screens begins on page 13.
Home Screen (FIG. 18)
All Meters
All Meters include Include A - D
A. Screen Identifier Icon: House displays when user is
on the Home Screen.
B. Operation Screens: List/menu of screen choices
available to user. Operation Screen choices include:
Manual Meters
MANUAL
TOTALS
Preset Meters
MANUAL
PRESET
TOTALS
1. Use UP or DOWN ARROWS to scroll through
options.
2. Press center, ENTER button to confirm selection
and display the screen.
C. Battery Indicator: Appears only on Home Screen.
Shows current battery charge strength. Appears and
flashes on all screens when battery’s charge is low.
D. Information Banner: Configurable information
banner. Data is input on Setup Mode Banner Screen,
page 19.
FIRE HAZARD: Conductive metal surfaces on the
meter must not make contact with any positively
charged metal surface, including (but not limited to),
the starter solenoid terminal, alternator terminal or
battery terminal. Such contact could cause electrical
arcing and a fire.
FIG. 18
MOBIL
1
5W-20
MANUAL
PRESET
TOTALS
C
A
D
B
Preset MetersManual Meters
MOBIL
1
5W-20
MANUAL
TOTALS
B
D
A
C
ti12175a
ti12184a