Filter
Top Products
MAST & RIGGING
,
FIGURE 19
Attach the bridle wires to the bow tangs by removing Attach the opposite ends of the bridles to the shackle
the bolts and slipping one end of each bridle into its on the bottom of the forestay adjuster.
tang. Retighten the bolts.
The forestay and shrouds are connected by a
large shackle. Attach this shackle to the lower
hole in the mast tang, insuring that the fore-
stay is between the two shrouds. Tighten the
shackle pin securely with pliers, then twist the
safety wire around the shackle body and
through the hole in the shackle pin.
!
, ' ,\
~
\
\'
FIGURE 20
8