Filter
Top Products
7 - 12
Power
Power system settings contains four tabs: Battery, Advanced, CPU Power Setting, and Wakeup Source.
Tap > Settings > System > Power.
Storage Card Screen
This screen displays the current capacity and usage sta-
tistics of the selected memory type: Storage Card.
Total storage card memory = The total MB of memory
capacity of Storage Card.
In use = The MB currently being used.
Free = The MB that is still available for use.
Storage Card—You can install one memory card in Dolphin terminals (see Installing
Memory Cards on page 3-9). If a storage card is installed in the terminal, you can see
capacity and usage statistics for the card. Data stored on the SD card is not affected
when the operating system is upgraded. Autoinstall programs, for example, are stored
in \\Honeywell\Autoinstall so that they are always installed after an operating
system upgrade or factory reset. Contact a Honeywell technical support representa-
tive for more information on how to perform a factory reset. For contact information,
see Technical Assistance on page 13-1.
Battery Tab
The battery tab displays the power level status of the
main battery and the status of the backup battery.
You may also turn on/off the capability to charge the main
battery using the USB cable.
Note: The Backup Battery gauge registers either 0% or 100%.
The percentage is not an indication of the level of charge
remaining on the backup battery. An installed and
functional battery registers 100%. A total discharge or a
battery error registers 0%.
Advanced Tab