Filter
Top Products
21
With Temperature and Humidity icon flashing, press the SET button to alternate between “temperature and relative humidity” or
“dew point and relative humidity.”
Temperature in Celsius or Fahrenheit
With Temperature and Humidity icon flashing, press and hold the SET button to alternate between temperature in Celsius (ºC)
or Fahrenheit (ºF).
Temperature Alarm
With Temperature and Humidity icon flashing, press the ALARM/CHART button once every time to recall a current
temperature for the corresponding channel, the upper temperature alarm limit with
icon, or lower temperature alarm limit
with
icon (if disabled, displays OFF). You can program temperature alarm limits for all five temperature and humidity
channels
Programming Upper and Lower limits for Temperature Alarm
• In the Temperature and Humidity Mode, press ALARM/CHART button once selecting the desired alarm limit – Upper
or Lower
• Press and hold ALARM/CHART button until the remote temperature and (Upper Alarm) or (Lower Alarm) icon
starts flashing.
• Adjust the temperature digits for the corresponding Temperature Alarm limit using the UP Sor DOWN Tbuttons.
Press and hold either button for fast digits advance.
• Press the ALARM/CHART button to confirm selection and return to the Temperature Alarm selection screen.
Disabling Temperature Alarm levels
With the Temperature & Humidity icon flashing, press the UP or DOWN arrow button to disable the alarm(s) – OFF will be
displayed if alarm is disabled
Note: The temperature alarms have a 0.5 ºC deviation to prevent false alarms due to small temperature fluctuations.
Temperature has to fall below (or above) the programmed level(s) to activate the alert.
Viewing the Max/Min Channel Temperature and Humidity
With the Temperature & Humidity icon flashing, press the MEMORY button to recall a current temperature and humidity,
minimum temperature and humidity or maximum temperature and humidity at the remote location. To clear the temperature
and humidity’s memories, press and hold the MEMORY button.
Rain Window
The main unit records the total amount of the rainfall for the last hour, 24 hours, past day, past week and the past month. The