Filter
Top Products
84
Select Readouts
(Advanced, Sonar view only)
Select Readouts sets individual digital readouts on the
Sonar View. This Advanced feature allows you to select
what data will be displayed in each of 6 fixed-position data
windows arranged around the left and bottom edges of
the Sonar View screen, or whether a particular window
will be turned off, displaying nothing in that area; you can
access this menu choice only when in Advanced User
Mode (see Setup Menu Tab: User Mode.)
Data windows can display readouts from supported
accessories such as Temp/Speed. Each data window can
either be empty or contain one of the following:
• Course • Temperature
• Navigation • Time + Date
• Position • Triplog
• Speed • Voltage.
To Select Readouts:
1. Make sure you are in Advanced User Mode, then highlight Select Readouts on the
Setup main menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.
3. The Select Readouts submenu will appear, showing a list of all Readouts. Use the UP or
DOWN Cursor keys to select a particular Readout position, then use the RIGHT or LEFT
Cursor keys to change what will be displayed at that position. (Course, Navigation,
Position, Off, Speed, Temperature, Time+Date, Triplog, Voltage)
Default Sonar View
Customized Sonar View
Select Readouts
83
Triplog Reset
(with Temp/Speed or optional-purchase GPS receiver)
Triplog Reset resets the Triplog to zero, and will appear in the menu if a Temp/Speed Accessory is
connected and the paddlewheel has moved at least once, or if an optional-purchase GPS Receiver
is connected. The Triplog provides the following information: timer for elapsed time, distance
traveled since last reset, and average speed.
NOTE: See Setup Menu Tab: Select Readouts (Advanced) to find out how to display Triplog
information on the screen.
To Reset Triplog:
1. Highlight Reset Triplog on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.
3. The Confirm dialog box will appear. To reset the Triplog, press the RIGHT Cursor key once
more. To cancel Reset Triplog, press the LEFT Cursor key.
Restore Defaults
Restore Defaults resets ALL menu settings to their factory
defaults. Use this menu choice with caution!
T
o Restore Defaults:
1. Highlight Restore Defaults on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.
3. The Confirm dialog box will appear. To reset the defaults, press the RIGHT Cursor key
once more. To cancel Restore Defaults, press the LEFT Cursor key.
531438-1_A - 737_EnglishOnly.qxd 9/25/2005 7:53 PM Page 90