Filter
Top Products
ID "Off" disables the units interpretation of targets, and displays the "raw" sonar
information as it is received. Advanced users may prefer this type of presentation, so they can
make there own interpretation from the information displayed.
TripLog
Triplog provides a time/distance calculation, based on input from the optional speed
accessory. The timer is started when the unit is first powered, and distance information is
collected to provide elapsed distance since power-up, and the average speed. To enable the
Triplog display, press ENTER.
The Triplog can be reset at any time by pressing STOP. Press ENTER to return to the
normal screen.