Filter
Top Products
Sonar Mode is used to select the Side-Looking mode of operation if the Wide Side
transducer is used. This setting changes the mode of operation of the Wide View to present
information gathered from either side of the boat, and should not be used with the normal
transducer. Refer to "Wide Side Operation" for more detailed information.
User Level is used to select Normal or Advanced operation. Advanced mode performs
several functions which will benefit the experienced user. Icons are not shown and numerical data
is smaller to allow more of the display to be used for the picture of the bottom. Several other
changes in operation occur which are designed to increase the speed of adjustments, and
maximize the graphic use of the display. Refer to "Advanced Operation" for more detailed
information.
Units-Speed allows a selection between displaying speed in MPH or KTS. MPH displays
your boat's speed in statute miles per hour and KTS displays your boat's speed in knots or
nautical miles per hour.
Boat speed and water temperature features require the use of the optional temp/speed
accessory, which must be purchased separately.