Filter
Top Products
Most other menu functions work the same in Wide Side mode as with the standard dual
beam transducer. "Bottom Alarm", "Fish Alarm", and "Sensitivity" have the same effect.
"Triplog" is available, if the optional speed and temperature accessory is connected.
To return to the normal "down" operation using the standard dual beam transducer, you
must reconnect the dual beam transducer (by replacing the Wide Side connector) or use the
switch to select the dual beam transducer. Next, configure the unit by selecting the "down" mode
under the "System Options" menu.
Note: The "sonar mode" must always be configured to match the type of transducer being
used.