Filter
Top Products
Also, several kits are available that include a Wide Side transducer with a switch or an additional
mounting system. (See Section One, Available Accessories)
When the Wide Side transducer is connected directly to your unit, or selected using a
transducer switch, the unit setup must be changed to correspond with the type of transducer
being used. This adjustment is made through the "System Options" menu. Use the MENU button
to select the "System Options" menu and press ENTER. Press MENU until the "sonar mode"
option is highlighted. Press UP or DOWN until "side" is displayed. Press ENTER when the
selection is correct.
Your Wide View is now configured for Wide Side operation.