Humminbird Wide W Fish Finder User Manual


 
beneath your boat is equal to or less than the selected alarm depth, a continuous alarm will
sound.
To disable the alarm, either move to deeper water, or select the Bottom Alarm menu, and press
ENTER to turn the alarm off.
FISH ALARM
The Fish Alarm alerts you to the presence of fish, or other targets not attached to the bottom, in
the water beneath your boat. The Fish Alarm has 3 different settings which correspond to the 3
different size fish targets shown on-screen.
To enable Fish Alarm, use the UP and DOWN arrow buttons to adjust the size return you want
to be alerted to: large fish only, large and medium size fish, or all fish. Then press ENTER to
enable the alarm.
Remember that it is impossible for sonar to determine if a signal return is a fish or some other
type of object or suspended debris. Any object not connected to the bottom is normally a fish and
is portrayed as a fish symbol. The strength of the reflected sonar signal from a target is a good
indicator of the size of the target, and the fish symbol displayed represents the strength of the
signal reflected from it.