Filter
Top Products
ID
ID is the automatic identification of target returns based on the strength of the returned signal
and other factors. Three options are available: ID “On” displays targets as one of three different
size fish symbols.
“ID+”, the default setting, provides more information about the location of the target by attaching
depth “strings” showing the digital depth of the target. When there are numerous targets on-
screen, not every target depth is shown, to avoid excessive clutter on-screen.
ID “Off” disables the units interpretation of targets and displays the “raw” sonar information as it
is received. Advanced users may prefer this type of presentation, so they can make their own
interpretation from the information displayed.
TRIPLOG
Triplog provides a time/distance calculation, based on input from the optional speed accessory.
The timer is started when the unit is first powered, and distance information is collected to provide
elapsed distance since power-up, and the average speed. To enable the Triplog display, press
ENTER.
The Triplog can be reset at any time by pressing STOP. Press ENTER to return to the normal
screen.