Filter
Top Products
8
3
BASIC OPERATION
■ DIAL↔[Y]/[Z] trade function
The transceiver is equipped [DIAL]↔[Y]/[Z] keys trade func-
tion. Push then push [CLR (DIAL/YZ)] to trade each
function.
Default setting:
DIAL: •Setting the frequency, •Selecting the memory chan-
nel, •Selecting the bank number
YZ keys:•Increasing or decreasing the audio level
Following explanation is according to the default setting.
■ Setting a frequency
ïUsing keypad
q Push [PWR] for 0.5 sec. to turn power ON, then push
[CLR] to select the frequency mode when memory CH
number or WX CH number appears on the function display.
w Push 5 appropriate digit keys to input the frequency.
•Enter [1] as the 1st digit.
• When a digit is mistakenly input, push [CLR] to clear,
then start again.
• Push [ENT] to enter consecutive zero digits.
•Only [2], [5], [7] and [0] can be entered as the 5th and
final digit.
ïUsing the tuning dial
q Push [PWR] for 0.5 sec. to turn power ON, then push
[CLR] to select the VFO mode when memory CH number
or WX CH number appears on the function display.
wRotate the [DIAL] to set the desired frequency.
eTo select the 1 MHz tuning step, push
,
then rotate the
tuning dial. Push again to return the normal tuning.
■ Accessing 121.5 MHz emer-
gency frequency
The IC-A23 and IC-A5 can quickly access the 121.5 MHz
emergency frequency. This function can be activated even
when the key lock function is in use.
q Push , then push [121.5] to call the emergency fre-
quency.
w Push [CLR] to exit from the emergency frequency.