Filter
Top Products
13
4
MEMORY OPERATION
■ Programming a memory
channel
The transceiver has 200 (10 BANK x 20 CH) memory chan-
nels for storage of often-used frequencies.
q Push [CLR] to select Frequency mode, if necessary.
w Select the desired frequency.
• Push
,
then push [ENT (WX)] to select a weather channel.*
• Set the desired frequency or WX channel* using the [DIAL] or
keypad.
e Push
,
then push [MR (MW)].
•Memory BANK and memory channel number appears.
r Rotate the [DIAL] to select the desired memory channel
number.
•[M] blinks.
•Push [BANK] to select the BANK number if desired. Push [CLR]
(or [BANK]) to exit the BANK selection mode.
t Push [ENT] to program the information into the channel
and return to Frequency mode.
*Weather channel:U.S.A. version only.
then
[0], [5] or [5] [ENT]
then
[3]
[0], [2] or [2] then [ENT]
or
•EXAMPLE: Programming WX-05* into memory BANK 3/
memory channel 2.