Icom IC-F4063T/S Marine Radio User Manual


 
8
2
PANEL DESCRIPTION
SCAN ADD/DEL (TAG) KEY
SSCCAADD
Push to add or delete the selected channel to/from the scan
group.
PRIO A/B KEYS
PPRRAA
” “
PPRRAARR
” “
PPRRBB
” “
PPRRBBRR
Push to select Priority A or Priority B channel.
Push and hold [Prio A (Rewrite)] to rewrite the Prio A chan-
nel.
MR-CH 1/2/3/4 KEYS
CCHH11
” “
CCHH22
” “
CCHH33
” “
CCHH44
Push to select an operating channel directly.
MONI KEY
MMOONN
Mute and release the CTCSS (DTCS) or 2-tone squelch
mute. Open any squelch/deactivate any mute while pushing
this key.
LIGHT KEY
LLIIGGTT
Push to turn the transceiver’s backlight ON temporarily only
when the backlight function is turned OFF in user set mode.
LOCK KEY
LLOOCCKK
Push and hold for 1 sec. to electronically lock all program-
mable keys except the following:
[Call] (incl. Call A and Call B), [Moni(Audi)] and
[Emergency].
Push and hold for 1 sec. again to turn the lock function
OFF.
HIGH/LOW KEY
HH//LL
Push to select the transmit output power temporarily or per-
manently, depending on the pre-setting.
•Ask your dealer for the output power level for each selection.
C.TONE CH ENT KEY
TTSSEELL
Push to select the continuous tone channel using
[CH Up]/[CH Down] to change the tone frequency/code set-
ting. The selected channel remains set as the continuous
tone channel until another channel is designated as such.
TALK AROUND KEY
TTAA
Push to turn the talk around function ON and OFF.
The talk around function equalizes the transmit frequency to the
receive frequency for transceiver-to-transceiver communication.
WIDE/NARROW KEY
WW//NN
Push to toggle the IF bandwidth between wide and narrow.
DTMF AUTODIAL KEY
DDTTMMAA
Push to enter the DTMF channel selection mode. Then
select the desired DTMF channel using [CH Up]/[CH
Down].
After selecting the desired DTMF channel, push this key to
transmit the DTMF code.
RE-DIAL KEY
DDTTMMRR
Push to transmit the last-transmitted DTMF code.