Filter
Top Products
32
8
SET MODE
SPCH LAN
When the optional UT-102
VOICE SYNTHESIZER UNIT
is
installed, you can select between English and
Japanese as the language.
Voice synthesizer functions
in English (default).
ENG
Voice synthesizer functions
in Japanese.
JPN
SPCH SPD
When the optional UT-102
VOICE SYNTHESIZER UNIT
is
installed, you can select between faster or slower
synthesizer output.
Voice synthesizer output
is faster (default).
FAST
Voice synthesizer output
is slower.
SLOW
CIV ADDR
To distinguish equipment, each CI-V
transceiver/receiver has its own Icom standard
address in hexadecimal code. The IC-R8500’s
address is 4AH.
When 2 or more IC-R8500’s are connected to an
optional CT-17
CI
-
V LEVEL CONVERTER
, rotate the
main dial to select a different address for each IC-
R8500 in the range 01H to 7FH.
Address set to 4AH
(default).
4AH
Address set to 01H.
01H
CIV BAUD
This item sets the data transfer rate. When “AUTO”
is selected, baud rate is automatically set according
to the connected controller or other Icom CI-V radio.
Auto baud rate
(default).
AUTO
19200 bps
19200
CIV TRAN
Transceive operation is possible with the IC-R8500
connected to an Icom CI-V radio. When “ON” is
selected, changing the frequency, operating mode,
etc. on the IC-R8500 automatically changes those of
connected radios and vice versa.
Transceive ON
(default).
ON
Transceive OFF.
OFF
CIV 731
When connecting the IC-R8500 to the IC-735 for
transceive operation, you must change the operating
frequency data length to 4 bytes.
•This item
must
be set to “ON” only when operating trans-
ceive with the IC-735.
Frequency data set to
5 bytes (default).
OFF
Frequency data set to
4 bytes.
ON