Filter
Top Products
24
5
REPEATER OPERATION
■ Auto repeater
function
(USA version only)
The USA version automatically activates the repeater settings (du-
plex, ON/OFF, duplex direction, tone encoder ON/OFF) when the
operating frequency falls within or outside of the general repeater
output frequency range. The offset and repeater tone frequencies
are not changed by the auto repeater function, reset these fre-
quencies, if necessary.
q While pushing [Y]+[Z], turn the power ON to enter
INITIAL SET
MODE
.
w Push [Y]/[Z] several times until
“RPt.” appears.
e Rotate [VOL] to select the desired
condition.
• “OF”—the auto repeater function is
turned OFF;
“R1”—the auto repeater function acti-
vates for duplex only;
“R2”—the auto repeater function acti-
vates for duplex and tone.
r Push [#•
ENT
] to exit
INITIAL SET
MODE
.
USING
INITIAL SET MODE
Frequency range and offset direction
FREQUENCY RANGE DUPLEX DIRECTION
145.200–145.495 MHz
“–” appears
146.610–146.995 MHz
147.000–147.395 MHz “+” appears
SKIP
AO
LM
MR
F
TX
75
50
25
D
SKIP
AO
LM
MR
F
TX
75
50
25
D
SKIP
AO
LM
MR
F
TX
75
50
25
D