Filter
Top Products
50
11
OTHER FUNCTIONS
DD
Auto repeater
The auto repeater function automatically turns
ON or OFF the duplex operation with a speci-
fied shift direction and tone encoder, when the
operating frequency falls within or outside of
145.200–145.495, 146.610–146.995 and
147.000–147.395 MHz range. The offset and
repeater tone frequencies are not changed by
the auto repeater function, reset these frequencies, if necessary.
• RPt.OF : The auto repeater function is turned OFF.
• RPt.R1 : Activates for duplex only. (default)
• RPt.R2 : Activates for duplex and tone.
DD
Auto power-off
The transceiver can be set to automatically
turn OFF after a specified period with a beep
when no key operations are performed.
• 30 min., 1 hour, 2 hours and OFF (default)
can be specified. The specified period is re-
tained even when the transceiver is turned
OFF by the auto power-off function. To can-
cel the function, select “
POF.OF” in this set mode.
DD
Repeater lock-out
Selects lockout type from repeater, busy and
OFF.
• RLO.RP: The repeater lockout is turned ON.
• RLO.bu : The busy lockout is turned ON.
• RLO.OF: No lockout is activated. (default)
U.S.A. version only
MR
F
TX
AO
MR
F
TX
MR
F
TX
MR
F
TX
MR
F
TX
MR
F
TX