Filter
Top Products
7
3
BASIC OPERATION
New2001
ïï
U.S.A.,Canadian and international channels
The IC-M402A/M402SA are preprogrammed with 57 U.S.A.,
61 Canadian and 57 international channels. These channel
groups may be specified for the operating area.
q Push [CH/WX•
DUAL] to select a regular channel.
• If a weather channel appears, push [CH/WX•DUAL] again.
w Push both [Y] and [Z] on the transceiver to change the
channel group, if necessary.
• U.S.A., International and Canadian channels can be selected in
sequence.
e Push [Y] or [Z] to select a channel.
•“DUP” appears for duplex channels.
•“ ” appears when a simplex channel is selected. “” appears
when a receive only channel for a Canadian channel group is
selected.
ïï
Weather channels
The IC-M402A/M402SA has 10 weather channels. These are
used for monitoring broadcasts from NOAA (National
Oceanographic and Atmospheric Administration.)
The transceiver can detect a weather alert tone on the se-
lected weather channel while receiving the channel, during
standby on a regular channel or while scanning. (p. 31)
q Push [CH/WX•
DUAL] once or twice to select a weather
channel.
•“WX” appears when a weather channel is selected.
• “WX ALT” appears when the Weather alert function is in use.
(p. 31)
w Push [Y] or [Z] to select a channel.
Push once or twice
When Weather alert is OFF.
When Weather alert is ON.
Push and
3
!IC-M402A_SA.qxd 03.11.11 2:51 PM Page 7 (1,1)