Filter
Top Products
38
COMMANDMIC
®
HM-127
New2001
11
■ Panel description
The optional HM-127 remotely controls the IC-M402A and
provides an optional Intercom function.
DD
Front and side keys
q PTT SWITCH [PTT] (pgs. 8, 43)
Push and hold to transmit; release to receive.
w CHANNEL UP/DOWN KEYS [
YY
]/[
ZZ
]
➥ Push either key to change the operating channel, Set
mode settings, etc. (pgs. 8, 30, 43, 47)
➥ Push either key to adjust audio level or noise squelch
level after [VOL] or [SQL] is pushed, respectively.
(pgs. 8, 43)
➥ Push either key to adjust the brightness of the LCD and
key backlight after [VOL• ] is pushed for 1 sec.
(p. 45)
➥ Checks tag channels or changes scanning direction dur-
ing scan. (pgs. 13, 46)
e CHANNEL 16/CALL CHANNEL KEY [16•
9]
➥ Selects Channel 16 when pushed. (pgs. 6, 42)
➥ Selects call channel when pushed for 1 sec. (pgs. 6, 42)
•“CALL” appears when call channel is selected.
➥ Push for 3 sec. to enter call channel programming con-
dition when call channel is selected. (pgs. 9, 44)
➥ While pushing [CH/WX•
U/I/C], enters channel com-
ments programming condition. (pgs. 10, 48)
➥ Enters Set mode when pushed while turning power ON.
(pgs. 30, 47)
DW
DIM
Top keys
q
e
w
y
t
r
u
OPTION
(IC-M402A only)
!IC-M402A_SA.qxd 03.11.11 2:52 PM Page 38 (1,1)