Filter
Top Products
POWER STEERING - 8A-1590-823226--1 996
NOTE: Engines with power steering are
equipped with a hose that is connected to the
power steering fluid cooler. A fitting on the other
end of the hose would normally be connected to
the power steering control valve. These hoses
are not used and are replaced with bulk hose
supplied with priority valve kit.
4. Remove and discard old (control valve-to-cooler)
hoses which are connected to power steering
cooler (port and starboard).
5. Cut two hoses (from bulk hose supplied) of suffi-
cient length to extend from power steering cool-
ers to respective fittings on priority valve.
6. Connect one end of each hose to its respective
power steering fluid cooler and other ends to fit-
tings on priority valve. Secure with hose clamps.
Tighten securely.
72588
a
b
c
a - Power Steering Fluid Cooler
b - Hose
c - Hose Clamp
72862
b
c
a
c
b
a - Priority Valve
b - Hose
c - Hose Clamp
7. Install return hose (large fitting on one end only,
from kit) to power steering control valve. Route
hose to priority valve, cut hose to length, and con-
nect to fitting on priority valve. Secure with hose
clamp. Tighten securely.
72863
b
a
72864
b
c
a
a - Priority Valve
b - Hose
c - Hose Clamp
Index