Filter
Top Products
VR209
12
SIRIUS RADIO OPERATION
Switching to SIRIUS Mode
Press the MODE button (4) to change the mode to Sirius Satellite Radio mode.
Activating Sirius Satellite Radio
Before you listen to Sirius Radio, you must subscribe to the service using your radio's
identification number. To display the Radio ID, press the SEEK /\ or SEEK \/ button (20, 19) to
access channel “000”. The screen displays "SID" followed by an 12 figure ID number.
Selecting a Band
In Sirius mode, press the BAND button (16) to access the Sirius user-preset channel groups in
the following order: SIR1, SIR2, SIR3.
Tuning a Channel
Rotate the TUNE/ENTER control (22) clockwise or counter-clockwise to tune up or down in
one step increments.
The channel information display can be changed to emphasize either Artist, Song Title or
Album information by pressing the INFO SCROLL button (14).
Storing Preset Channels
The preset buttons (27) can be used to store 6 channels per band (SIR1, SIR2 and SIR3),
allowing convenient access to your favorite channels.
Programming Channels
1. Select the channel you want to store in memory.
2. Press and hold a preset button (27) until the corresponding preset button number appears
on the screen.
3. Repeat steps 1 and 2 to program additional channels.
Recalling a Preset Channel
Press one of the six preset buttons (27) within a selected band to tune a preset channel
directly.
Auto Store/Preset Scan
Preset Scan
Press the AS/PS button (15) to preview each stored preset channel in SIR1, SIR2 and SIR3 for
10 seconds. Press the AS/PS button again to stop scanning and play the current channel.
Preset Tune
In Sirius mode, press and hold the AS/PS button (15) to start the Preset Tuning Mode. This will
allow the sequential tuning of the SR1, SR2 and SR3 preset channels when the TUNE/ENTER
control (22) is used. Press and hold the AS/ PS button again to deactivate Preset Tuning
Mode.
SIRIUS Tuning Modes
Category Mode
Press the SEEK/CAT/TRK /\ / \/ buttons (20/19) to view available categories.
Each category title and associated channels will be displayed in increments. While in the
category mode, the individual channels within a category may be accessed by rotating the
TUNE/ENTER control (22). Once a highlighted channel has been selected, press the TUNE/
ENTER control to tune to that channel. While viewing a category list, press the INFO SCROLL
button to change display information between Channel Name, Artist, or Song Title.
Direct Tune Mode
1. Press and hold the TUNE/ENTER control (22) to switch to Direct Tune/Skip Channel
mode. After accessing Direct mode, “DIRECT _ _ _” appears on the display.
2. Turn the TUNE/ENTER control (22) to select a number for the hundreds digit position.
3. Press the TUNE/ENTER control to confirm entry of the hundreds digit. The tens digit will
flash on/off.
4. Turn the TUNE/ENTER control to select a number for the tens digit position.
5. Press the TUNE/ENTER control again to confirm entry of the tens digit. The ones digit will
flash on/off.
6. Turn the TUNE/ENTER control to select a number for the ones digit position.
3
2
4
5
11
6
12
7
13
8
14
15
9
16
10
17
18
19
26
1
24
20
22
23
21
27
i