Filter
Top Products
19
Parameter
Simplex &
Repeater
Odd-split
Memory channel lockout * Yes Yes
Narrow FM Yes Yes
Beat shift Yes Yes
* Program Scan Memory and the Priority channel cannot be stored as ON or OFF for Memory
channel lockout.
STORING SIMPLEX AND STANDARD REPEATER FREQUENCIES
1 Press [VFO] to enter VFO mode.
2 Rotate the ENC control to select your desired frequency.
• You can also directly enter a desired frequency using the keypad.
3 If storing a standard repeater frequency, select the following data:
• Offset direction
• Tone function, if necessary
• CTCSS/ DCS function, if necessary
If storing a simplex frequency, you may select other related data (CTCSS or DCS
settings, etc.).
4 Press [F] - [MR].
• A memory channel number appears and blinks.
• When the channel has stored data, the “ ” icon appears.
• Memory channel numbers L0/U0 ~ L2/U2 and Pr (Priority Channel) are reserved for
other functions.
5 Rotate the ENC control to select the memory channel in which you want to
store the data.
6 Press [MR] to store the data to the channel.
Note: If you store the data in a Memory channel that already has data stored in it, the old
data will be cleared and the new data will be stored.