Filter
Top Products
18
■ Conventional Operation (Single Zone/ Multi-Zone)
If Scan Type has been programmed for Conventional Single Zone or
Conventional Multi-Zone operation, you are able to reprogram the Priority
mode.
1 Press the key programmed as Scan Program.
• The (KCH-14 ) or
SCAN
(KCH-15) icon appears on the display and blinks.
2 Press the GRP and keys or rotate the CH control to select the zone
and channel you will set or unset as Priority.
• Press the PF 2 key to toggle between Zone Select and Channel Select.
3 Press the PF 4 key to toggle the selected channel between Priority and
Normal.
• “P1”, “P2”, or “PP” appears on the sub-display when Priority mode is selected.
4 Press the PF 1 or PF 3 key to exit scan programming.