TK-7102H
12
■ Pins Connection
Voice scrambler
12 pins lead wire 11 pins lead wire
functions with connector (A) with connector (B)
A A-12 –
B A-11 –
C A-10 –
D A-9 –
5– B-5
6– B-7
7 A-8 –
8 A-7 –
9 A-3 –
10 – B-11
11 – B-9
12 – B-4
INSTALLATION
■ Setting With the KPG-70D
Select “External Devices” from the “Edit” menu and set
the “Scrambler”.
Note :
The voice scrambler board is connected subsequent to the
de-emphasis circuit.
Cushion (G13-1963-04)
Cushion (G13-1964-04)
Voice scrambler board
Front side
to CN2 and CN3
to CN2
and CN3
CN3
Voice scrambler
board
CN2
TX-RX UNIT
Component side
Avoid forming the wiring towards shielding cover closure area.
1-2. Example for Connection
■ Picture (Trunking Board)
Fig. 3
Insulation sheet
Cushion D
(G13-1972-04)
Cushion C
Cushion B
Trunking board
TX-RX unit
CN4
Front side
■ Setting With the KPG-70D
Select “External Devices” from the “Edit” menu and set
the “SmarTrunk”.
Fig. 4