Filter
Top Products
14
Cable connections and wiring diagrams for Lowrance radar, RIM 100
interface module and display unit. These connections cover models
LRA-4000, LRA-5000 open array radars.
† Serial device data cable may need RIM software update to use.
**Note: RIM power cable must be connected to the same 12-volt power source as
the radar's display unit.
LRA-4000, LRA-5000 open array radars
See following
detail drawing C
RIM Power **
(red/power +;
black/ground –)
See following
detail drawing D
RIM 100 SP
Display unit
White/Receive
Dark gray (not used)
Purple/Transmit
RIM
p
ower/data cable
RIM Data
Display unit power/data cable
Display unit pwr
NMEA 2000
network pwr
Display unit
data
Data cable for future
serial device.†
Drain/Ground