Filter
Top Products
11
Panel Mount
1: Attach the ush mounting template
to the selected mounting position
using adhesive tape.
2: Drill pilot holes for the four hole saw
cuts and for the four self tapping
screws used to secure the display.
3: Use a hole saw to cut the four corner
radius
4: Cut along the dotted line and remove
the shaded area.
5: Connect all cables to the rear of
the unit before placing the unit
into the console. Secure using the four
provided #6-20 x 1-1/2” screws
6: To nish off the installation rmly
clip the front bezel in place