Filter
Top Products
51
Create a Route
To create a route, first press the
MENU key twice, highlight the
“Route Planning” label, and
press the ENT key. The screen
shown at right appears.
This unit can store up to 100
routes. To create a route, highlight
“New Route” and press the ENT
key. The screen at right appears.
The route’s name appears at the
upper left corner of the screen.
Select it to change the name, if
desired.
Now press the down arrow key
until “Waypoints” is highlighted.
Now press the ENT key. “End of
route” is highlighted. Press the
ENT key again. The “Edit Route
Waypoints” menu appears as
shown at right. You can add
waypoints to the route from the
map or from the waypoint list. In
this example, we chose to add
from the waypoint list. Selecting
“Add Waypoint” brings up the
“Find Waypoint” screen shown at
right.
To add saved waypoints to the
route, select “Saved” from the
Subcategory list. To create a new
waypoint for the route, select
“New”. In this example, we’re us-
ing previously saved waypoints,