Lowrance electronic X125 SONAR User Manual


 
35
Auto Depth Range command: automatically sets the depth range
shown on the sonar chart to always keep the bottom in view.
Upper and Lower Limits command: sets the upper and lower depth
limits of the sonar chart. Lets you zoom in on a specific portion of the
water column.
Stop Chart command: stops the sonar chart from scrolling. Used
when you want to "freeze" the image for closer study.
Chart Speed command: sets the scrolling speed of the sonar chart.
Depth Cursor command: displays a cursor line on the sonar chart
which allows you to accurately measure the depth of a sonar target.
Overlay Data command: chooses what types of information (such as
water temperature) to show overlaid on the sonar chart screen.
Sonar Features command: launches the Sonar Features menu which
controls many functions and options, including frequency selection,
screen color mode, auto depth and sensitivity, surface clarity, noise re-
jection, Fish I.D. symbols, the zoom bar and zone bar.
Ping Speed command: sets the rate at which sonar pings are made.
Pages
The Pages Menu controls the five major display options. They are the
Full Sonar Chart, Split Zoom Sonar Chart, Split Frequency Sonar
Chart, Digital Data and the flasher-style FlashGraf.
You access the Pages Menu by pressing the
PAGES key. You select a
display option by using or to highlight the option and then pressing
ENT. (You can clear the Pages Menu by pressing EXIT.)
Pages Menu showing some Sonar display options
(at left, dual-frequency menu; at right, single-frequency menu).