Filter
Top Products
75
Sonar Features menu with Surface Clarity selected (at left, dual-
frequency menu; at right, single-frequency menu).
2. Press ↓ to SURFACE CLARITY|ENT.
3. Press ↓ or ↑ to select clarity level|
EXIT|EXIT|EXIT.
In the illustration at left, Surface Clarity is turned off.
The right view shows Surface Clarity set at High.
Transducer Type
(X126DF and X136DF only)
The dual-frequency units include the TRANSDUCER TYPE command. With
this option you can tell your unit what type of transducer you're using,
so that it can properly interpret the signals it's receiving.
To change your transducer type, press
MENU|MENU|↓ to TRANSDUCER
TYPE|ENT. Select the appropriate transducer type and press
ENT|EXIT|EXIT.
Surface clutter