Filter
Top Products
19
4
BIIS OPERATION
■ Default setting
The following functions are assigned to each programmable switch
as the default. Ask your dealer for details.
[P0]; Call : Push to transmit a 5-tone/BIIS call when the
selected channel is a 5-tone or MSK channel,
respectively.
[P1]; Digital : Push to select the call list ID/transmit mes-
sage, or to display the receive message
record for selection.
[P3]; Moni(Audi) : Push this key after the communication to
send a “clear down” signal during MSK chan-
nel operation.
[ ]/[ ]; CH Down/Up
: While in the standby condition, selects the
operating channel.
After pushing [Digital] or [TX Code CH Se-
lect], selects call list or TX code channel, re-
spectively.
[P2]/[Red]; Null : No function is assigned.
IC-F50_F60_MDC-2.qxd 06.11.17 4:39 PM Page 19 (1,1)