Filter
Top Products
MD3081 and MD3082 Manual Inflator
Service
Indicator
Step 5
Cylinder
Step 2
O-Ring
Step 3
Tab
Step 4
Sensor Ring
Step 3
Bayonet
Lever
FIGURE 8
4) Raise, and hold, the lever into the inflator housing. Install a new
cylinder/bayonet assembly by engaging bayonet tabs in housing,
pushing in then turning clockwise 1/8 turn to a full stop (Fig. 9).
WARNING: PFD WILL ONLY INFLATE IF CYLINDER IS
TURNED TO A FULL STOP.
9 Inflatable PFD Owner’s Manual