Filter
Top Products
MD3083 and MD3084 Service Indicator
Automatic Inflator
FIGURE 2
3) Ensure the oral-inflation dust cap is in the stowed position (Fig. 7).
4) Ensure the service indicator is green and the pull-tab lanyard is
hanging on the outside; secure the Velcro™ strips on both sides of
the Inflatable PFD.
5) For the MD3083 and MD3084 only - Ensure the bobbin is valid. The
PFD, or bobbin, must have been purchased within the last three (3)
years. If the purchase date is unknown, check the date printed on the
bobbin and replace if older than three (3) years (see Re-arming Your
PFD (MD3083 and MD3084), p. 10).
Readiness Checklist
Check your Inflatable PFD and ensure all of the checkpoints listed below
are true before use.
n Service indicator is green.
n No rips, tears or holes; all seams are securely sewn; and the fabric,
straps and hardware are still strong.
n All Velcro
™
are securely fastened.
n Inflatable PFD is not twisted.
n Oral-inflation dust cap is in the stowed position.
n For the MD3083 and MD3084 only - Ensure the bobbin is valid. The
PFD, or bobbin, must have been purchased within the last three (3)
years. If the purchase date is unknown, check the date printed on
the bobbin and replace if older than three (3) years (see Re-arming
Your PFD (MD3083 and MD3084), p. 10).
3 Inflatable PFD Owner’s Manual