Filter
Top Products
cap will not lock in the deflate position so it is necessary to hold it in
place (Fig. 5).
2) Gently squeeze the Inflatable PFD until all air or gas has been
expelled. To avoid damage; do not wring or twist the Inflatable PFD.
Put the inflation tube dust cap back in its stowed position on the
oral inflation tube (Fig. 6).
IMPORTANT: Ensure all air has been removed from the PFD.
3) Examine the single point status indicator (Fig. 1). If the indicator is
red, the mechanism has been fired and the inflator requires service
(see Re-arming your PFD, p. 9).
IMPORTANT: The single point status indicator must be green
before proceeding.
4) Your device is ready to be repacked (see Repacking p. 13).
Dust cap
position for
deflation
Dust cap
in stowed
position
FIGURE 7
Cap In
Deflate
Position
FIGURE 6
Usage Below Freezing
When the temperature is below freezing, the Inflatable PFD should
be worn partially inflated because a fully discharged cylinder may not
quickly or adequately inflate your Inflatable PFD. Under these conditions
use the oral inflator to adequately top-up the PFD, after CO
2
inflation.
WARNING: CO
2
inflation could over-pressurize and damage your
Inflatable PFD if already fully inflated.
8 Inflatable PFD Owner’s Manual Inflatable PFD Owner’s Manual 9