Filter
Top Products
Repacking
If your Inflatable PFD has been used and/or the hydrostatic inflator
replaced, always inflate through the oral tube and check that it stays
inflated at least overnight. With the dust cap in the top of the oral tube,
gently squeeze the Inflatable PFD until all air or gas has been expelled
(Fig. 6). Do not wring or twist the Inflatable PFD. Put the oral tube dust
cap back in its stowed position on the oral tube (Fig. 7). Let the life
jacket dry before packing.
IMPORTANT: Ensure all air is removed before repacking. Before
following the repacking sequence, be sure to properly re-arm
your Inflatable PFD, p. 9.
1) Lay out the Inflatable PFD flat on a clean surface (Fig. 18).
FIGURE 18
2) Fold side (A) inward along the full length of the dotted line (Fig. 19).
F old cover (B) over; covering side (A) (Fig. 20).
A
FIGURE 19
3) Repeat step 2 with side (C), cover (D).
12 Inflatable PFD Owner’s Manual Inflatable PFD Owner’s Manual 13
B
FIGURE 20
NOTE: The fold lines, on the
diagram, are provided to assist
with packing.