Filter
Top Products
Defining WLAN connection settings
10
Copyright © 2005 Nokia. All rights reserved.
type the IP address or domain name of the Proxy
Server, type the Port Number (for example 8000 or
8080). You can use the No proxy for field to define the
domains for which the HTTP or HTTPS proxy is not
needed.
6 Press Done and press Finish to save the settings of
your ad hoc IAP.
Defining general WLAN settings
To access the general settings, select Desk→ Tools→
Control Panel
→ Connections→ Wireless LAN.
1 Press Menu to access the Settings page, where you can
define the Background scan interval. If background
scanning is enabled, the device will detect the
availability of WLAN automatically. The availability of
a WLAN network will be indicated in the user interface
with a small "W" icon. If background scanning is
disabled, then WLAN networks will only be scanned for
when an application is establishing a connection to
the Internet.
Change the Background scan interval to the desired
value (Never, 1 minutes, 2 minutes, 5 minutes, 10
minutes). Selecting Never reduces battery consumption.
2 Next, select whether WLAN power saving is enabled or
disabled. There are differences in the way WLAN access
points implement WLAN power saving, which may lead
to interoperability problems with your device when
WLAN power saving is used. Disabling WLAN power
saving increases power consumption when WLAN
connections are used.
3 Press Done to save the settings.
Nokia_9500_Using_WLAN_en_1.fm Page 10 Friday, December 9, 2005 1:08 PM