Filter
Top Products
18
ATOM 3.0 OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5216-r02 (9/6/11)
• A (< 2 sec) - to step forward through PDPS screens.
• A (hold) - to scroll forward through PDPS screens (8/sec) from 30 to 190 FT (9 to 57 M) in increments of 10 FT (3 M).
• M (< 2 sec) - to step back through PDPS screens.
• S (< 2 sec) at any time - to exit and revert to Plan Lead-in.
LOG MODE (NORM/GAUG)
Information from the latest 24 NORM and/or GAUG dives is stored for viewing.
> After exceeding 24 dives, data for the most recent dive is recorded and the oldest is deleted.
> Dives are numbered from 1 to 24 starting each time NORM (or GAUG) Dive Mode is activated. After the post dive 24 hour
period has elapsed and DC operation shuts off, the first dive of the next DC activation period will be #1.
> In the event that a dive’s elapsed time (EDT) exceeds 199 (min), the data at the 199 (min) interval is recorded in the Log
upon surfacing of the unit.
Sequence >> Lead-in > Preview > Data 1 > Data 2 > Data 3.
Log Lead-in, information includes (Fig. 41):
> Log (book) icon.
> Graphics Goto and LOG.
• A (< 2 sec) - to step forward to SET F.
• M (< 2 sec) - to step back to PLAN.
• S (< 2 sec) - to access Log Preview.
Log Preview, information includes (Fig. 42):
> Log Mode (book) icon.
> Date (month.day or day.month), the dive was conducted.
> Time dive began (hr:min) with AM (or PM) icon if 12 Hour Format, no icon if 24 Hour Format, and lazy 8 icon if Away time;
or graphics NONE YET if no dive recorded.
> Dive number (1 to 24, 0 if no dive yet) with # icon.
> Graphic NOR (or GAU or VIO).
> NX, (PZ+), CF, DS icons - if they apply.
• A (< 2 sec) - to step through Preview screens from the most recent to the oldest recorded.
• A (hold) - to scroll through Preview screens from the most recent to the oldest recorded (8/sec).
• M (< 2 sec) - to step back through Preview screens.
• S (< 2 sec) - to access Data 1 for the dive displayed.
• S (2 sec) at any time - to revert to Log Lead-in.
Log Data 1, information includes (Fig. 43A, B):
> Log Mode (book) icon
> Pre dive SI (hr:min), - : - - if no previous dive that activation period, with SURF icon.
> Max Depth with MAX and FT (or M) icons.
> Elapsed Dive Time with EDT and min icons.
> Pressure of Tank 1 at end of dive with PSI (or BAR) and TMT (tank) 1 icons.
> Total Ascent Time (min) with TAT and min icons, if Deco.
> TLBG with the max accumulation segment flashing, others fixed up to end of dive accumulation. All segments flashing if a
Delayed Violation. No TLBG if Gauge Mode.
> VARI, max Ascent Rate sustained for 4 sec
> NX, (PZ+), CF, DS icons - if they apply
• S (< 2 sec) - to access Data 2 for the dive displayed.
• S (2 sec) at any time - to revert to Log Lead-in.
Log Data 2, information includes (Fig. 44):
> Log Mode (book) icon.
> Graphic SEA (or EL - 2 to EL - 7), indicating the Altitude at which the dive was conducted.
> Temperature with ° icon and graphic F (or C), indicating the minimum recorded during that dive.
• S (< 2 sec) - to access Data 3 for that dive; or revert to Preview if a GAUG dive.
• S (2 sec) at any time - to revert to Log Lead-in.
Log Data 3, information includes (Fig. 45):
> Log Mode (book) icon.
> Graphic O2.
> O2 staturation (%) at end of dive with O2% icon, 2 dashes if Violation Gauge Mode.
> Highest PO2 (ATA) value reached during the dive with PO2 icon.
> FO2 Set Point for the Gas in use when dive ended with FO2 and Gas (tank) icons.
> NX, (PZ+) icons - if they apply.
• S (< 2 sec) - to revert to that dive's Log Preview.
• S (2 sec) at any time - to revert to Log Lead-in.
Fig. 41 - LOG LEAD-IN
Fig. 42 - LOG PREVIEW
(Deco during dive)
Fig. 43A - LOG DATA 1
(No Deco, Nitrox)
Fig. 43B - LOG DATA 1
(Deco, Nitrox)
Fig. 44 - LOG DATA 2
Fig. 45 - LOG DATA 3
(only if NORM Nitrox)