Filter
Top Products
6.5 PANEL MOUNTING
Figure 6-4 Meter - Exploded VIew
1. Cut a hole in your
panel, as shown in
Figure 6-4. For
specific dimensions
refer to Figure 6-5.
2. Insert the meter into
the hole.
Be sure the front
bezel gasket is flush
to the panel.
3. Slide on mounting
bracket to secure.
4. Proceed to Section 7
to connect your
sensor input and
main power.
13
"NEW" STYLE
MOUNTING
BRACKET
FRONT BEZEL
CASE
REAR COVER
(REMOVED)
PANEL
CUT-OUT
"OLDER" STYLE
MOUNTING
BRACKET 2 PCS
GASKET
PRODUCT
LABEL
CONNECTOR
LABEL
Figure 6-5 Panel Cut-Out