Filter
Top Products
52
SECTION 26. FACTORY PRESET VALUES
Table 26-1. Factory Preset Values
MENU ITEM FACTORY PRESET VALUES
INPT Input Type: RTD.3
DEC.P Decimal Point Position: FFFF.
RD.CF Reading Configuration:
R.1=F (Fahrenheit)
S1.CF Setpoint 1 Configuration:
S.1=A (Setpoint is active above)
S.2=U (Setpoint is unlatched)
S.3=O (On/Off control)
S2.CF Setpoint 2 Configuration:
S.1=A (Setpoint is active above)
S.2=U (Setpoint is unlatched)
S1.DB Setpoint 1 Deadband: 030.0
S2.DB Setpoint 2 Deadband: 030.0
OT.CF Output Configuration:
O.1=E (Analog output is enabled)
O.2=C (Analog output is current)
O.3=A (Analog output follows the display value)
OT.S.O Output Scale and Offset:
0-1000 = 4-20 mA dc
LK.CF Lock Out Configuration
RS=E (Enable the RESET button in the run mode)
SP=E (Enable setpoint changes)
SP1 Setpoint 1 Value: 0000
SP2 Setpoint 2 Value: 0000