Filter
Top Products
14
Mounting to Camera
Remove the hot shoe cover from the camera.
Attach the flash unit to the camera.
Turn the locking lever of the flash unit in the
direction opposite to that indicated by (FIX➝)
(clockwise from the direction of the LCD
panel).
Slide the hot shoe foot of the flash unit into the
camera's hot shoe from the back of the
camera forward.
Turn the locking lever of the flash unit in the
direction indicated by (FIX➝) to lock it.
●
The following cameras have a shoe lock pin. When
attaching the flash unit, turn the locking lever in
the (FIX
➝
) direction and lock the flash unit to the
camera with the shoe lock pin. When releasing the
flash unit, be sure to do so after turning the
locking lever in the direction opposite to that
indicated by (FIX
➝
) and loosening the shoe lock
pin. Otherwise, the hot shoe will be damaged.
645D, K-x, K-7, K-m/K2000, K20D, K10D, K200D,
K110D, K100D Super, K100D,
*ist D series, *ist,
MZ-S, MZ-L/ZX-L/MZ-6, MZ-60/ZX-60
● The 672 does not come with a hot shoe. The
optional hot shoe grip 672 should be used.
1
1
2
2