Filter
Top Products
40
● The AF540FGZ can be used in combination with
a built-in flash unit only when used with the
following cameras.
*ist D, *ist, MZ-S, MZ-L/ZX-L/MZ-6, K10D (NOTE),
K20D, K200D, K-x, K-7, K-m/K2000
(NOTE)
However, this requires the firmware to be updated
to Version 1.10 or later. Download the firmware for
the K10D from the following URL, and install it on
your camera.
http://www.pentax.jp/english/support/download_digital.html
You may also contact your nearest PENTAX
service center for firmware updates. (This will
involve a fee.)
Using the AF540FGZ in Combination with a Built-in Flash Unit
Setting switch