85
MAINTENANCE AND LUBRICATION
Steering Cable Inspection
1. The handlebars and steering nozzle should operate
smoothly. If movement is stiff, see your authorized
Polaris dealer for service.
2. Turn the handlebars from lock to lock and check to
be sure that the clearances between the steering
nozzle and the rear hull are even on both sides. If
the alignment is not even, see your authorized
Polaris dealer for service.
Throttle Cable Inspection
1. Depress and release the throttle lever. It should
return to its initial position smoothly. If it doesn’t,
see your authorized Polaris dealer for service.
2. Throttle lever free-play should not exceed
.020″-.060″ (.5-1.5 mm). If it does, see your
authorized Polaris dealer for service.
Fuses
The NGI is protected by
a 2 amp fuse. There are
also two 15 amp inline
fuses on the chassis
harness for the fuel
pump and any battery
powered accessories.
After changing a fuse, always reinstall the weathertight
cover to keep the fuses dry.
.020-.060″ (.5-1.5 mm)
Battery Fuel Pump NGI
15AMP
FA
15AMP 2AMP