Q-Logic FC2354601-00 A Marine RADAR User Manual


 
FC2354601-00 A 5-1
Section 5
Windows NT Driver Installation
(QL2300.SYS)
5.1
Introduction
This section provides instructions for installing the Windows NT driver under the
following operating system conditions:
Initial installation of the Windows NT 4.0 operating system and the
Windows NT driver
Installation of the Windows NT driver in an already installed Windows NT 4.0
operating system
Installing an updated Windows NT driver in an already installed
Windows NT 4.0 operating system that has an older version of the driver
5.2
Windows NT Driver Files
The latest version of the software drivers and documentation for Windows NT are
available on the QLogic Web site. Be sure to review the Readme.txt file for both
new and changed information.
5.3
Windows NT Installation
To install Windows NT 4.0 on a Fibre Channel hard disk attached to a QLA23xx
HBA, perform the installation procedures in section 5.3.1. If Windows NT 4.0 is
already loaded on your system, perform the installation procedures in section 5.3.2.
If Windows NT 4.0 and an older Windows NT driver are already installed on your
system, perform the update procedures in section 5.3.3.